Wednesday , 22 November 2017
Can’t bear the thought of putting yet another boring black case into your bag? Me either. Here’s a simple way to make your own cute camera case in whatever colors you want.

Cute Camera Case – How-To

Cute camera case
Can’t bear the thought of putting yet another boring black case into your bag? Me either. Here’s a simple way to make your own cute camera case in whatever colors you want.

Since cameras vary so widely in size, you’ll notice there are NO MEASUREMENTS whatsoever in this post. You’ll have to figure that out on your own. Fear not! It’s really not that hard. Personally, I’m a huge fan of eyeballing it. That usually works. ^_^
This is the most complicated tutorial I’ve written so far. I’m really more of an “attach the thing to the other thing” sort of person, so do bear with me! The photos do a pretty good job of explaining when I fail. Click on any of them to see them larger.

Here’s what you’ll need:
* Fabric for the outside of the case (I used a nice cotton)
* Fabric for the inside of the case (I used a slightly thicker vintage cotton)
* Batting
* Velcro
* Thread
* A sewing machine, or a needle and lots of patience

Step 1:
Lay your camera on top of the fabric you wish to use. Measure out the length: you want to have the fabric be about two and a half measures of your camera. Make sure that you leave an extra inch or more for seam allowances on all sides. Once you’re certain, go ahead and cut the fabric.
It should look something like this:
How to Make a Camera Case Tutorial - Step 1
Using the piece you just cut as a template, cut out a piece of the top fabric and the batting. To make the sides of your camera bag, lay your camera out on the fabric again. Measure an extra inch on all sides, and cut. Repeat with batting and top layer. Remember to cut two of all the side pieces.
How to Make a Camera Case Tutorial - Step 2
Step 2: Lay the cut pieces together in a quilt sandwich: Batting on the bottom, then the top fabric facing up, then the lining fabric facing down.
How to Make a Camera Case Tutorial - Step 2a
Step 3: Sew the lined up layers together around the side. Be sure to leave about an inch so you can turn it all inside out.
How to Make a Camera Case Tutorial - Step 3
The pieces will look like this, once they’re turned inside out. Repeat this step with the other two fabric stacks. (You may want to leave more than an inch on the big strip.)
How to Make a Camera Case Tutorial - Step 3a
Step 4: Once they’re all turned inside out, sew over the the hole where you turned them inside out.
How to Make a Camera Case Tutorial - Step 4
Step 5: Stitch over the fabric to keep all three layers from shifting. Also, it looks neat. Use whatever sort of design you like. Repeat this step with all three pieces.
How to Make a Camera Case Tutorial - Step 5
Step 6: Line the two side pieces up in the middle of the long piece, and sew them on. It’s helpful to have your camera handy for eyeball measurements at this point. The rule of thumb is that you want to be able to fold one end of the fabric up and over those side pieces.
How to Make a Camera Case Tutorial - Step 6
Step 7: Fold the bottom of the fabric up, and sew the bottoms and the other sides of the two smaller pieces to it, like so:
How to Make a Camera Case Tutorial - Step 7
See those little wings sticking out of the bottom? Those are called mistakes “Design Features”. Yeah. It’s um…extra padding. Okay, so that’s what happens sometimes when you eyeball stuff. I made the little side pieces a bit too long. Fortunately, I kept my camera on hand, and it was a simple matter to just stitch them to fit. So let that be a lesson to me you. When eyeballing, keep checking the fit.
How to Make a Camera Case Tutorial - Step 7a
Step 8: Cut all the loose thread ends to neaten it up. Turn the case inside out. Now attach velcro to the inside of the lip, and the outside of the pouch like so:
How to Make a Camera Case Tutorial - Step 8
I used the self adhesive kind because for some reason, I have tons of it. Also, I wanted to see if it would hold up. So far, so good!
That’s it. You now have an adorable camera case you made yourself!
Cute camera case in purse

*Note: I don’t mind if you decide you loooove making these so much that you want to start selling them. Please just make sure you credit the design to me, and link back to the blog. I work so hard on these stinkin’ things. Thanks!

Check out more awesome craft ideas on absolutelysmall.com

 

Related Posts Plugin for WordPress, Blogger...

11 comments

  1. These are perfect! I always have my camera with me to catch alphabet art shots. I like how you can be creative with the “quilting” too but for those who don’t sew that well, you could probably use a pre-quilted placemat as fabric and move on to the assemblage steps. Thanks for sharing! http://www.abcfotos.etsy.com

  2. Okay so I had a premonition today…I was thinking of a friend who I saw take her camera out of her purse yesterday and wipe it off on her pants. I was thinking I need to make her a cute camera case, and I can use velcro to close it…I swear, I was just thinking this on the way home rom work today, must be an omen!

  3. At first glance, I thought this was a case for a phone…. which is a fab idea, too! Cameras and phones can both use cases!

  4. hey! I love this idea! Its awesome and soo cute! Thanks so much for this post, and your easy to follow instructions =) I’m in dire need of a camera case and am totally look forward to making this sometime soon.

  5. where is this fabric from! i love love love it!!!!!! I have to have some!

  6. Hello!!! I loved your case! I bought today the same camera as yours at the photo (canon powershot sx130 is). Are you selling cases like that? (I’m sure I cannot do it by myself…)
    I’m having some problems to find a cute case for my camera… If you sell, how much does it costs and would we have some choices for fabric patterns?
    Have a nice day!
    Erika

  7. Hi! Please, please, please tell me you bought that fabric online.. Where did you get it?
    are there any details on the selvedge? I have to have some! It’s so cute! What a find!!

  8. Super cute! Thanks for sharing. We will be featuring you on our blog ziggycrafts.blogspot.com

  9. I love this idea so much- i tried it myself! my sewing machine broke, unfortunately. So i took on the challenge of sewing it with a needle and thread! i also did a button instead of velcro. I love how it turned out– so thanks!:)

  10. Good Morning! Just looked at this case and the instructions. They are great. Went to your site…why aren’t you selling these in addition to your dear little plush toys? Although I have a sewing machine, I am too busy with my own craft of making refrigerator magnets and prints to do any sewing. These would be perfect gifts for the holidays. There are so many crafts I know I could do…other crafters could make our magnets, but who has time? Please consider putting these on Etsy!
    Fredda from The Magnificent Magnet

Leave a Reply to Theresa Cancel reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>